Advance Concrete Form Corners
Inside and outside corners permit either abutting panels or fillers to be secured without loose locking clips. Available in all heights and bar spacings.
Standard In Stock Advance Form Corners
4"x4" Inside Corner
The 4"x4" is the standard inside corner for 90 degree angle.
All Corners
Case hardened latches to perfection. Precision manufacturing.
Our corners are made with superior materials and will fit your panels perfectly.
1"x1" Outside Corner
The 1"x1" is the standard outside corner for a 90 Degree angle.
2"x2" Outside Corner
The 2"x2" is an outside corner for a 90 degree angle that adds 2" in each direction, enabling you to switch from and 8" to a 10" wall utilize existing fillers.
4"x6" Inside Corner (Reversible)
The 4"x6" corner is used when the ongoing wall thickness changes 2" at T wall. It can be used for jogs. Some bar patterns can be made into a 4"x6" (Reversible) Inside Corner this allows the corner to be used left or right.
4"X4" 45 Degree Inside Corner
The 4"X4" 45 degree inside corner is the standard inside corner for 45 degree angles.
7"x7" 135 Degree Outside Corner
The 7"x7" 135 degree outside corner is the standard corner for a 45 degree corner with an 8" wall.
4"x4" Hinged (Swing) Corner
The 4"x4" hinged inside corner is used for other angles.
2" Offset Corner (Reversible)
The 2" offset corner is used on a wall that changes by 2" on one side. Some bar patterns can be reversible.